Outils pour utilisateurs

Outils du site


materiel:sun-fire-v20z

Voici un serveur SUN FIRE v20z qui tourne grâce un système DEBIAN SQUEEZE (dmesg ci-dessous).

SUN FIRE v20z



SUN FIRE v20z

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 10:07:46 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=8871f69c-92dc-4a8b-a84f-c1d5d739237a ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
[    0.000000]  BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000fbf70000 (usable)
[    0.000000]  BIOS-e820: 00000000fbf70000 - 00000000fbf77000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fbf77000 - 00000000fbf80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fbf80000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xfbf70 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF00000000 write-back
[    0.000000]   1 base 00FC000000 mask FFFC000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000fbf70000
[    0.000000]  0000000000 - 00fbe00000 page 2M
[    0.000000]  00fbe00000 - 00fbf70000 page 4k
[    0.000000] kernel direct mapping tables up to fbf70000 @ 10000-16000
[    0.000000] RAMDISK: 3770f000 - 37fef261
[    0.000000] ACPI: RSDP 00000000000f7db0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000fbf74bd4 0005C (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000fbf76c0c 000F4 (v03 SUN    V20z     06040000 PTEC 000F4240)
[    0.000000] ACPI: DSDT 00000000fbf74c30 01F68 (v01   Sun      V20z 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 00000000fbf7ffc0 00040
[    0.000000] ACPI: HPET 00000000fbf76d00 00038 (v01 Sun    V20z     06040000 PTEC 00000000)
[    0.000000] ACPI: APIC 00000000fbf76d38 00076 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: SPCR 00000000fbf76dae 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
[    0.000000] ACPI: SSDT 00000000fbf76dfe 0009D (v01 SUN    V20z     06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 00000000fbf76e9b 0009D (v01 SUN    V20z     06040000  LTP 00000001)
[    0.000000] ACPI: SRAT 00000000fbf76f38 000C8 (v01 SUN    V20z     06040000 SUN  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 1 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-80000000
[    0.000000] SRAT: Node 1 PXM 1 80000000-fc000000
[    0.000000] NUMA: Allocated memnodemap from 14000 - 15fc0
[    0.000000] NUMA: Using 20 for the hash shift.
[    0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
[    0.000000]   NODE_DATA [0000000000015fc0 - 000000000001dfbf]
[    0.000000]   bootmap [000000000001e000 -  000000000002dfff] pages 10
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0080000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 00016d9584]    TEXT DATA BSS ==> [0001000000 - 00016d9584]
[    0.000000]   #3 [003770f000 - 0037fef261]          RAMDISK ==> [003770f000 - 0037fef261]
[    0.000000]   #4 [000009a000 - 0000100000]    BIOS reserved ==> [000009a000 - 0000100000]
[    0.000000]   #5 [00016da000 - 00016da108]              BRK ==> [00016da000 - 00016da108]
[    0.000000]   #6 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
[    0.000000]   #7 [0000014000 - 0000015fc0]       MEMNODEMAP ==> [0000014000 - 0000015fc0]
[    0.000000] Bootmem setup node 1 0000000080000000-00000000fbf70000
[    0.000000]   NODE_DATA [0000000080000000 - 0000000080007fff]
[    0.000000]   bootmap [0000000080008000 -  00000000800177ef] pages 10
[    0.000000] (8 early reservations) ==> bootmem [0080000000 - 00fbf70000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE
[    0.000000]   #2 [0001000000 - 00016d9584]    TEXT DATA BSS
[    0.000000]   #3 [003770f000 - 0037fef261]          RAMDISK
[    0.000000]   #4 [000009a000 - 0000100000]    BIOS reserved
[    0.000000]   #5 [00016da000 - 00016da108]              BRK
[    0.000000]   #6 [0000010000 - 0000014000]          PGTABLE
[    0.000000]   #7 [0000014000 - 0000015fc0]       MEMNODEMAP
[    0.000000] found SMP MP-table at [ffff8800000f7de0] f7de0
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[    0.000000]  [ffffea0001c00000-ffffea00037fffff] PMD -> [ffff880080200000-ffff880081dfffff] on node 1
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009a
[    0.000000]     0: 0x00000100 -> 0x00080000
[    0.000000]     1: 0x00080000 -> 0x000fbf70
[    0.000000] On node 0 totalpages: 524170
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 110 pages reserved
[    0.000000]   DMA zone: 3812 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7112 pages used for memmap
[    0.000000]   DMA32 zone: 513080 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 507760
[    0.000000]   DMA32 zone: 6943 pages used for memmap
[    0.000000]   DMA32 zone: 500817 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfd000000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfd000000, GSI 24-27
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfd001000] gsi_base[28])
[    0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfd001000, GSI 28-31
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 32
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at fc000000 (gap: fc000000:2c00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:2
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u2097152
[    0.000000] pcpu-alloc: s90328 r8192 d24360 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 [1] 1 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1017709
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=8871f69c-92dc-4a8b-a84f-c1d5d739237a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 0 size 32 MB
[    0.000000] Memory: 4053560k/4128192k available (3083k kernel code, 472k absent, 74160k reserved, 2048k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=2
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:512
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2389.256 MHz processor.
[    0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4778.51 BogoMIPS (lpj=9557024)
[    0.008029] Security Framework initialized
[    0.008036] SELinux:  Disabled at boot.
[    0.008376] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.015290] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.017005] Mount-cache hash table entries: 256
[    0.017203] Initializing cgroup subsys ns
[    0.017207] Initializing cgroup subsys cpuacct
[    0.017210] Initializing cgroup subsys devices
[    0.017213] Initializing cgroup subsys freezer
[    0.017215] Initializing cgroup subsys net_cls
[    0.017247] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.017250] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.017252] CPU 0/0x0 -> Node 0
[    0.017254] tseg: 00fbf80000
[    0.017258] mce: CPU supports 5 MCE banks
[    0.017273] Performance Events: AMD PMU driver.
[    0.017279] ... version:                0
[    0.017280] ... bit width:              48
[    0.017282] ... generic registers:      4
[    0.017283] ... value mask:             0000ffffffffffff
[    0.017285] ... max period:             00007fffffffffff
[    0.017287] ... fixed-purpose events:   0
[    0.017288] ... event mask:             000000000000000f
[    0.018049] ACPI: Core revision 20090903
[    0.021154] Setting APIC routing to flat
[    0.021478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.061173] CPU0: AMD Opteron(tm) Processor 250 stepping 0a
[    0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.012000] Initializing CPU#1
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.012000] CPU 1/0x1 -> Node 1
[    0.148078] CPU1: AMD Opteron(tm) Processor 250 stepping 0a
[    0.148093] Brought up 2 CPUs
[    0.148096] Total of 2 processors activated (9557.49 BogoMIPS).
[    0.148747] CPU0 attaching sched-domain:
[    0.148753]  domain 0: span 0-1 level NODE
[    0.148756]   groups: group ffff88007ff2b000 cpus 0 group ffff88007ff2b060 cpus 1
[    0.148764] CPU1 attaching sched-domain:
[    0.148766]  domain 0: span 0-1 level NODE
[    0.148768]   groups: group ffff8800fbb14000 cpus 1 group ffff8800fbb14060 cpus 0
[    0.148880] devtmpfs: initialized
[    0.152177] regulator: core version 0.5
[    0.152177] NET: Registered protocol family 16
[    0.152197] node 0 link 1: io port [0, 2fff]
[    0.152200] TOM: 00000000fc000000 aka 4032M
[    0.152202] node 0 link 1: mmio [fd000000, feafffff]
[    0.152205] node 0 link 1: mmio [fec00000, fec0ffff]
[    0.152208] node 0 link 1: mmio [a0000, bffff]
[    0.152210] node 0 link 1: mmio [fed00000, fed0ffff]
[    0.152214] bus: [00,ff] on node 0 link 1
[    0.152216] bus: 00 index 0 io port: [0, ffff]
[    0.152218] bus: 00 index 1 mmio: [fc000000, febfffff]
[    0.152220] bus: 00 index 2 mmio: [fec00000, fecfffff]
[    0.152222] bus: 00 index 3 mmio: [a0000, bffff]
[    0.152224] bus: 00 index 4 mmio: [fed00000, fcffffffff]
[    0.152232] ACPI: bus type pci registered
[    0.152291] PCI: Using configuration type 1 for base access
[    0.152696] bio: create slab  at 0
[    0.152696] ACPI: EC: Look up EC in DSDT
[    0.154520] ACPI: Interpreter enabled
[    0.154523] ACPI: (supports S0 S1 S5)
[    0.154537] ACPI: Using IOAPIC for interrupt routing
[    0.158222] ACPI: No dock devices found.
[    0.158325] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.158507] pci 0000:00:07.1: reg 20 io port: [0x1000-0x100f]
[    0.158638] pci 0000:00:0a.1: reg 10 64bit mmio: [0xfd000000-0xfd000fff]
[    0.158701] pci 0000:00:0b.1: reg 10 64bit mmio: [0xfd001000-0xfd001fff]
[    0.158877] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd120000-0xfd120fff]
[    0.158933] pci 0000:01:00.1: reg 10 32bit mmio: [0xfd121000-0xfd121fff]
[    0.159021] pci 0000:01:05.0: reg 10 32bit mmio: [0xfe000000-0xfe7fffff]
[    0.159028] pci 0000:01:05.0: reg 14 32bit mmio: [0xfd100000-0xfd11ffff]
[    0.159035] pci 0000:01:05.0: reg 18 32bit mmio: [0xfd800000-0xfdffffff]
[    0.159056] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    0.159097] pci 0000:01:05.0: supports D1 D2
[    0.159142] pci 0000:00:06.0: bridge 32bit mmio: [0xfd100000-0xfe7fffff]
[    0.159182] pci 0000:02:02.0: reg 10 64bit mmio: [0xfe810000-0xfe81ffff]
[    0.159190] pci 0000:02:02.0: reg 18 64bit mmio: [0xfe800000-0xfe80ffff]
[    0.159230] pci 0000:02:02.0: PME# supported from D3hot D3cold
[    0.159234] pci 0000:02:02.0: PME# disabled
[    0.159271] pci 0000:02:02.1: reg 10 64bit mmio: [0xfe830000-0xfe83ffff]
[    0.159279] pci 0000:02:02.1: reg 18 64bit mmio: [0xfe820000-0xfe82ffff]
[    0.159319] pci 0000:02:02.1: PME# supported from D3hot D3cold
[    0.159322] pci 0000:02:02.1: PME# disabled
[    0.159365] pci 0000:02:04.0: reg 10 io port: [0x2000-0x20ff]
[    0.159373] pci 0000:02:04.0: reg 14 64bit mmio: [0xfe850000-0xfe85ffff]
[    0.159380] pci 0000:02:04.0: reg 1c 64bit mmio: [0xfe840000-0xfe84ffff]
[    0.159388] pci 0000:02:04.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
[    0.159413] pci 0000:02:04.0: supports D1 D2
[    0.159447] pci 0000:00:0a.0: bridge io port: [0x2000-0x2fff]
[    0.159450] pci 0000:00:0a.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[    0.159497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.THOR._PRT]
[    0.159565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.Z000._PRT]
[    0.159629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.Z002._PRT]
[    0.166673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *10 11)
[    0.166861] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11)
[    0.167043] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 5 10 11)
[    0.167223] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
[    0.167375] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.167378] vgaarb: loaded
[    0.167411] PCI: Using ACPI for IRQ routing
[    0.167411] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.167411] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.167411] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.172024] Switching to clocksource hpet
[    0.173320] pnp: PnP ACPI init
[    0.173355] ACPI: bus type pnp registered
[    0.173582] pnp 00:00: mem resource (0xe0000-0xfffff) overlaps 0000:02:04.0 BAR 6 (0x0-0xfffff), disabling
[    0.173585] pnp 00:00: mem resource (0xc0000-0xc7fff) overlaps 0000:02:04.0 BAR 6 (0x0-0xfffff), disabling
[    0.173936]   alloc irq_desc for 19 on node 0
[    0.173947]   alloc kstat_irqs on node 0
[    0.175229] pnp: PnP ACPI: found 14 devices
[    0.175231] ACPI: ACPI bus type pnp unregistered
[    0.175247] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.175251] system 00:00: iomem range 0xffc00000-0xfff7ffff has been reserved
[    0.175254] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.175257] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
[    0.175265] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[    0.175268] system 00:09: ioport range 0x1100-0x117f has been reserved
[    0.175271] system 00:09: ioport range 0x1180-0x11ff has been reserved
[    0.175275] system 00:09: ioport range 0xca2-0xca3 has been reserved
[    0.175278] system 00:09: ioport range 0xb78-0xb7b has been reserved
[    0.175281] system 00:09: ioport range 0x190-0x193 has been reserved
[    0.175283] system 00:09: ioport range 0x290-0x291 has been reserved
[    0.180092] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[    0.180095] pci 0000:00:06.0:   IO window: disabled
[    0.180100] pci 0000:00:06.0:   MEM window: 0xfd100000-0xfe7fffff
[    0.180105] pci 0000:00:06.0:   PREFETCH window: 0xfc000000-0xfc0fffff
[    0.180112] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[    0.180115] pci 0000:00:0a.0:   IO window: 0x2000-0x2fff
[    0.180119] pci 0000:00:0a.0:   MEM window: 0xfe800000-0xfe8fffff
[    0.180122] pci 0000:00:0a.0:   PREFETCH window: 0xfc100000-0xfc1fffff
[    0.180127] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[    0.180129] pci 0000:00:0b.0:   IO window: disabled
[    0.180132] pci 0000:00:0b.0:   MEM window: disabled
[    0.180134] pci 0000:00:0b.0:   PREFETCH window: disabled
[    0.180157] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.180159] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.180162] pci_bus 0000:01: resource 1 mem: [0xfd100000-0xfe7fffff]
[    0.180165] pci_bus 0000:01: resource 2 pref mem [0xfc000000-0xfc0fffff]
[    0.180167] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.180170] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
[    0.180172] pci_bus 0000:02: resource 2 pref mem [0xfc100000-0xfc1fffff]
[    0.180222] NET: Registered protocol family 2
[    0.180420] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.182407] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.189019] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.189742] TCP: Hash tables configured (established 524288 bind 65536)
[    0.189746] TCP reno registered
[    0.189894] NET: Registered protocol family 1
[    0.189924] pci 0000:00:07.3: boot interrupts on device [1022:746b] already disabled
[    0.189928] pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled
[    0.189933] pci 0000:00:0a.0: disabled boot interrupts on device [1022:7450]
[    0.189936] pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[    0.189941] pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled
[    0.189944] pci 0000:00:0b.0: disabled boot interrupts on device [1022:7450]
[    0.189946] pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[    0.189981] pci 0000:01:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.409033] pci 0000:01:00.0: PCI INT D disabled
[    0.409040] pci 0000:01:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.624029] pci 0000:01:00.1: PCI INT D disabled
[    0.624035] pci 0000:01:05.0: Boot video device
[    0.624123] Unpacking initramfs...
[    0.845051] Freeing initrd memory: 9088k freed
[    0.854645] agpgart-amd64 0000:01:05.0: AGP bridge [1023/9880]
[    0.854654] agpgart-amd64 0000:01:05.0: aperture size 4096 MB is not right, using settings from NB
[    0.854657] agpgart-amd64 0000:01:05.0: aperture from AGP @ fd100000fe000000 size 32 MB
[    0.854659] Aperture beyond 4GB. Ignoring.
[    0.854661] pci 0000:00:18.3: no usable aperture found
[    0.854743] pci 0000:00:18.3: consider rebooting with iommu=memaper=2 to get a good aperture
[    0.855506] audit: initializing netlink socket (disabled)
[    0.855527] type=2000 audit(1356892205.853:1): initialized
[    0.858775] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.860241] VFS: Disk quotas dquot_6.5.2
[    0.860301] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.860400] msgmni has been set to 7934
[    0.860684] alg: No test for stdrng (krng)
[    0.860742] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.860745] io scheduler noop registered
[    0.860747] io scheduler anticipatory registered
[    0.860749] io scheduler deadline registered
[    0.860809] io scheduler cfq registered (default)
[    0.862670] Linux agpgart interface v0.103
[    0.862714] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.862835] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.863200] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.863342] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.863405] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.865821] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.865827] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.865939] mice: PS/2 mouse device common for all mice
[    0.866034] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.866069] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.866085] cpuidle: using governor ladder
[    0.866088] cpuidle: using governor menu
[    0.866094] No iBFT detected.
[    0.866432] TCP cubic registered
[    0.866556] NET: Registered protocol family 10
[    0.867610] Mobile IPv6
[    0.867614] NET: Registered protocol family 17
[    0.867699] PM: Resume from disk failed.
[    0.867722] registered taskstats version 1
[    0.868024] rtc_cmos 00:06: setting system clock to 2012-12-30 18:30:06 UTC (1356892206)
[    0.868073] Initalizing network drop monitor service
[    0.868118] Freeing unused kernel memory: 592k freed
[    0.868594] Write protecting the kernel read-only data: 4240k
[    0.885216] udev[82]: starting version 164
[    0.983098] Floppy drive(s): fd0 is 1.44M
[    0.986017] SCSI subsystem initialized
[    0.999225] tg3.c:v3.116 (December 3, 2010)
[    0.999245]   alloc irq_desc for 25 on node 0
[    0.999248]   alloc kstat_irqs on node 0
[    0.999262] tg3 0000:02:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
[    1.001449] usbcore: registered new interface driver usbfs
[    1.001481] usbcore: registered new interface driver hub
[    1.001510] usbcore: registered new device driver usb
[    1.005531] FDC 0 is a post-1991 82077
[    1.009067] Fusion MPT base driver 3.04.12
[    1.009072] Copyright (c) 1999-2008 LSI Corporation
[    1.026728] libata version 3.00 loaded.
[    1.030804] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.033393] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.040397] Fusion MPT SPI Host driver 3.04.12
[    1.048174] pata_amd 0000:00:07.1: version 0.4.1
[    1.048322] ohci_hcd 0000:01:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.048349] ohci_hcd 0000:01:00.0: OHCI Host Controller
[    1.048388] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.048419] ohci_hcd 0000:01:00.0: irq 19, io mem 0xfd120000
[    1.048436] scsi0 : pata_amd
[    1.048599] scsi1 : pata_amd
[    1.048653] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
[    1.048656] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
[    1.049315] tg3 0000:02:02.0: eth0: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:66MHz:64-bit) MAC address 00:09:3d:12:e3:73
[    1.049319] tg3 0000:02:02.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    1.049322] tg3 0000:02:02.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.049325] tg3 0000:02:02.0: eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[    1.049449]   alloc irq_desc for 27 on node 0
[    1.049451]   alloc kstat_irqs on node 0
[    1.049460] mptspi 0000:02:04.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[    1.049637] mptbase: ioc0: Initiating bringup
[    1.102048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.102051] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.102053] usb usb1: Product: OHCI Host Controller
[    1.102055] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    1.102057] usb usb1: SerialNumber: 0000:01:00.0
[    1.102155] usb usb1: configuration #1 chosen from 1 choice
[    1.102195] hub 1-0:1.0: USB hub found
[    1.102209] hub 1-0:1.0: 3 ports detected
[    1.102330] ohci_hcd 0000:01:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.102342] ohci_hcd 0000:01:00.1: OHCI Host Controller
[    1.102353] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
[    1.102368] ohci_hcd 0000:01:00.1: irq 19, io mem 0xfd121000
[    1.158033] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.158036] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.158038] usb usb2: Product: OHCI Host Controller
[    1.158040] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    1.158042] usb usb2: SerialNumber: 0000:01:00.1
[    1.158218] usb usb2: configuration #1 chosen from 1 choice
[    1.158271] hub 2-0:1.0: USB hub found
[    1.158282] hub 2-0:1.0: 3 ports detected
[    1.376307] ata2.00: ATAPI: CD-224E, 1.9A, max UDMA/33
[    1.392214] ata2.00: configured for UDMA/33
[    1.394535] scsi 1:0:0:0: CD-ROM            TEAC     CD-224E          1.9A PQ: 0 ANSI: 5
[    1.407675] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[    1.407681] Uniform CD-ROM driver Revision: 3.20
[    1.407907] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.413706] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.540021] ioc0: LSI53C1030 C0: Capabilities={Initiator}
[    2.373505] scsi2 : ioc0: LSI53C1030 C0, FwRev=01032300h, Ports=1, MaxQ=222, IRQ=27
[    2.750972]   alloc irq_desc for 26 on node 0
[    2.750975]   alloc kstat_irqs on node 0
[    2.750983] tg3 0000:02:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 26
[    2.799048] tg3 0000:02:02.1: eth1: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:66MHz:64-bit) MAC address 00:09:3d:12:e3:74
[    2.799053] tg3 0000:02:02.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    2.799056] tg3 0000:02:02.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.799059] tg3 0000:02:02.1: eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[    4.057245] scsi 2:0:1:0: Direct-Access     SEAGATE  ST373207LC       D701 PQ: 0 ANSI: 3
[    4.057264] scsi target2:0:1: Beginning Domain Validation
[    4.074742] scsi target2:0:1: Ending Domain Validation
[    4.074809] scsi target2:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[    7.328085] scsi 2:0:1:0: Attached scsi generic sg1 type 0
[    7.344955] sd 2:0:1:0: [sda] 143374650 512-byte logical blocks: (73.4 GB/68.3 GiB)
[    7.346402] sd 2:0:1:0: [sda] Write Protect is off
[    7.346405] sd 2:0:1:0: [sda] Mode Sense: ab 00 10 08
[    7.348297] sd 2:0:1:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    7.352317]  sda: sda1 sda2
[    7.373876] sd 2:0:1:0: [sda] Attached SCSI disk
[    7.701932] PM: Starting manual resume from disk
[    7.701938] PM: Resume from partition 8:2
[    7.701940] PM: Checking hibernation image.
[    7.717306] PM: Error -22 checking image file
[    7.717308] PM: Resume from disk failed.
[    7.746923] EXT3-fs: INFO: recovery required on readonly filesystem.
[    7.746927] EXT3-fs: write access will be enabled during recovery.
[    9.846685] kjournald starting.  Commit interval 5 seconds
[    9.846706] EXT3-fs: sda1: orphan cleanup on readonly fs
[    9.846716] ext3_orphan_cleanup: deleting unreferenced inode 1810436
[    9.846748] ext3_orphan_cleanup: deleting unreferenced inode 1810439
[    9.846755] ext3_orphan_cleanup: deleting unreferenced inode 1810438
[    9.846761] ext3_orphan_cleanup: deleting unreferenced inode 1810437
[    9.846767] ext3_orphan_cleanup: deleting unreferenced inode 1810434
[    9.846773] EXT3-fs: sda1: 5 orphan inodes deleted
[    9.846775] EXT3-fs: recovery complete.
[    9.910536] EXT3-fs: mounted filesystem with ordered data mode.
[   11.253704] udev[402]: starting version 164
[   11.527559] processor LNXCPU:00: registered as cooling_device0
[   11.527609] processor LNXCPU:01: registered as cooling_device1
[   11.528565] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   11.528576] ACPI: Power Button [PWRB]
[   11.528656] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   11.528660] ACPI: Power Button [PWRF]
[   11.528728] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[   11.528731] ACPI: Sleep Button [SLPF]
[   11.599383] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   11.855211] EDAC MC: Ver: 2.1.0 Sep 23 2012
[   11.875112] EDAC amd64_edac:  Ver: 3.2.0 Sep 23 2012
[   11.875340] EDAC amd64: ECC is enabled by BIOS.
[   11.875541] EDAC amd64: ECC is enabled by BIOS.
[   11.875582] EDAC MC: Rev E or earlier detected
[   11.875643] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[   11.875646] EDAC MC: Rev E or earlier detected
[   11.875690] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
[   11.875714] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[   11.887522] Error: Driver 'pcspkr' is already registered, aborting...
[   11.895565] AMD768 RNG detected
[   11.974753] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.988785] shpchp 0000:00:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[   11.988982] shpchp 0000:00:0a.0: Cannot reserve MMIO region
[   11.992214] shpchp 0000:00:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[   11.992220] shpchp 0000:00:0b.0: Cannot reserve MMIO region
[   11.992366] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.123575] Adding 984056k swap on /dev/sda2.  Priority:-1 extents:1 across:984056k 
[   13.352253] EXT3 FS on sda1, internal journal
[   13.466298] loop: module loaded
[   14.617506] tg3 0000:02:02.0: firmware: requesting tigon/tg3_tso.bin
[   14.648878] tg3 0000:02:02.0: eth0: Failed to load firmware "tigon/tg3_tso.bin"
[   14.649044] tg3 0000:02:02.0: eth0: TSO capability disabled
[   14.806989] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.908496] tg3 0000:02:02.0: eth0: Link is up at 1000 Mbps, full duplex
[   17.908501] tg3 0000:02:02.0: eth0: Flow control is on for TX and on for RX
[   17.909366] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   28.865021] eth0: no IPv6 routers present

materiel/sun-fire-v20z.txt · Dernière modification: 2019/01/20 14:08 (modification externe)